Government Maintenance - TB-10-4610-241-240003

TB 10-4610-241-24

Government Maintenance. The Government will be responsible for completing preventive and corrective

maintenance in accordance with the approved Maintenance Allocation Chart. The Government will also be

responsible for maintaining and providing to EASI or HEI appropriate maintenance records for each ROWPU by

serial number and each maintenance action performed on each ROWPU or ROWPU component by serial number (if

applicable). The Government will make these records available for contractor examination to determine warranty

coverage for components and/or end items.

Owning Unit Responsibilities. The owning unit responsibilities shall be the same as those identified in the

Government Responsibilities and Government Maintenance paragraphs.

Warranty Administration Office (WARAO) Responsibilities. The Warranty Administration Office for ROWPU is

U. S. Army Tank-automotive and Armaments Command, Warren MI, 48397-5000. WARAO responsibilities are

identified in the Government Responsibilities paragraph.

Army Oil Analysis Program (AOAP). The Army Oil Analysis Program does not apply to the ROWPU.

10.

Alterations/Modifications. Alterations and modifications shall not be made unless expressly authorized or directed

by: U. S. Army Tank-automotive and Armaments Command, Warren MI,48397-5000.

11.

Design/Performance Specifications. Equipment performance is as specified in the appropriate technical manual.

12.

Nullification. Actions taken by Government personnel which will void ROWPU end item or component warranties

are:

Failure to operate the ROWPU and/or components in accordance with approved Technical Manuals;

Failure to maintain the ROWPU and/or components in accordance with approved Maintenance Allocation Chart

recommendation and Technical Manual procedures:

Failure to properly install, connect, position or adjust the end item and/or components as prescribed by the

appropriate Technical Manuals;

Failure to adequately preserve a ROWPU unit before placing said unit into storage or failure to adequately

depreserve a ROWPU when said unit is removed from storage;

Transportation or storage of a ROWPU unit under conditions determined to be detrimental to the performance of

the unit;

Operation of the end item and/or components outside stated performance parameters;

Operation of the end item and/or components for purposes other than intended (as a water purification system);

Removal of components from one serial numbered ROWPU for reinstallation on a different serial numbered

ROWPU (cannibalization). Installation of components that have been repaired under this warranty program

being an exception;