TB 9-2300-365-15
Warranty Duration for Engine - 18 months from final
Warranty Duration - 24 months from initial
acceptance date or 12,000 miles, whichever occurs
acceptance (Conditional or Final Acceptance,
first (same duration as GS Warranty).
whichever occurs first, as identified in Block 3 of DD
Form 250). If you are unsure if the transmission is
Warranty Duration for Emission Related Components
under warranty, contact Stewart & Stevenson at 1-
- 60 months from final acceptance date, 100,000
800-221-3688 and ask for their Warranty
miles, or 3,000 operating hours, whichever occurs
Department. Be prepared to provide both the vehicle
and transmission serial numbers. (NOTE: If any
first. (NOTE: After the 18 months/12,000 miles
Engine Warranty has expired, the local WARCO may
transmission warranty remains after expiration of the
contact Caterpillar directly for the remaining Emission
18 months/12,000 miles Final Acceptance Warranty,
Warranty, at 1-309-578-3295.)
the local WARCO may contact Allison at 1-317-242-
5000).
Warranty Coverage for Engine - Provides coverage for
complete engine (genuine Caterpillar components
Warranty Coverage - Provides coverage for all genu-
only), all levels of maintenance.
ine Allison parts (all levels of maintenance), to include
the Transmission Assembly, Electronic Control Unit
(ECU), Vehicle Interface Module and Throttle Position
Warranty Coverage for Emission Related Components
- Provides coverage for the following components (all
Sensor.
levels of maintenance):
In addition to the above Warranty duration and
Fuel Injectors
Coverage, Allison will warranty the transfer case C6
Camshaft
Bearing against failure for a period of five (5) years
from initial acceptance (Conditional or Final Accep-
Cam Followers
tance, whichever occurs first, as identified in Block 3
Turbo Cart
of DD Form 250). This warranty applies to the C6
Comp Hsg
Thrust Bearing and any subsequent secondary
Turbine Hsg
damage adjudged to have occurred as a result of a
Intake Gasket
C6 Thrust Bearing failure. This additional warranty
Air/Fuel Ratio
Aftercooler Core (Radiator)
coverage applies only to MD3070PT transmissions
Hoses, Clamps, Pipes, Insulation
with a serial number earlier than 6510072174 and
transfer cases with a serial number earlier than 3265.
Important Note: The engine must be left in the
(NOTE: The C6 Thrust Bearing Warranty remaining
vehicle for Caterpillar to provide the "Exclusive
after expiration of the 18 month/12,000 mile Stewart
Vendor Extended Warranty". Transportation to the
& Stevenson warranty, may be administered by the
local WARCO with Allison at 1-317-242-5000).
Caterpillar dealer is provided by the vehicle owner.
(c) Rockwell International Corporation
Important Notes: This `Exclusive Vendor Extended
2135 West Maple Road
Warranty' requires that all labor must be performed
Troy, Ml 48084-7186
by an Allison authorized representative. Opening of
Phone: (810) 435-1461
any of the Allison components (excluding Vehicle
Interface Module) voids the vendor extended
Warranty Duration - 18 months from final acceptance
warranty for that part.
date or 12,000 miles, whichever occurs first (same
duration as GS Warranty).
(b) Caterpillar, Inc.
Defense & Federal Products, TC-A
P.O. Box 470
Warranty Coverage - Provides coverage for replace-
ment of the pinion seal and addition of a POSE seal
Mossville, IL 61552-0470
for vehicles #1 through #3133.
Phone: (309) 578-3295
4