TB 9-2300-366-15
Fuel Injectors
Warranty Coverage - Provides for Contractor repair or
replacement for cabs, cargo beds, frame rails, and
Camshaft
crossmembers exhibiting corrosion for all vehicles
Cam Followers
produced prior to February 28, 1997. The warranty
Turbo Cart
shall not apply to cosmetic surface corrosion, corro-
Comp HSg
Turbine HSg
sion which results from working surfaces, or corro-
intake Gasket
sion resulting from scratches, accidents, war dam-
age, or abuse. For the purposes of this warranty,
Air/Fuel Ratio
Aftercooler Core (Radiator)
corrosion which is the subject of this warranty is
Hoses, Clamps, Pipes, Insulation
defined as "Any perforation or any other damage
caused by corrosion requiring repair or replacement of
Important Note: The engine must be left in the
parts".
vehicle for Caterpillar to provide the "Exclusive
Vendor Extended Warranty". Transportation to the
Contractor Responsibilities.
4.
Caterpillar dealer is provided by the vehicle owner.
a. When the owning unit has directed the
contractor to correct the supplies, the contractor will
(c) Rockwell International Corporation
furnish all material required to correct the defective
supplies. Replacement parts shall be provided within
2135 West Maple Road
ten (10) working days and correction of defects shall
Troy, Ml 48084-7186
be initiated within thirty (30) working days after
Phone: (810) 435-1461
receipt of written claim notification.
Warranty Duration - 18 months from final acceptance
b. When the contractor receives written
date or 12,000 miles, whichever occurs first (same
notification requiring contractor repair, the contractor
duration as GS Warranty).
will have instructions as follows:
Warranty Coverage - Provides coverage for replace-
(1) To correct the supplies in the field unit
ment of the pinion seal and addition of a POSE seal
location, or
for vehicles #1 through #3133.
(2) To return the vehicle or parts to the
Vehicle Serial Number Effectivity - Covers vehicle
contractor's designated facility for correction.
serial numbers 1 through 3133 identified by the third
through sixth characters of the serial number.
When the contractor corrects the supplies, all labor
involved shall be borne by the contractor. Additional-
f. Corrosion Warranty - In addition to the GS
ly, the contractor shall arrange and bear all transpor-
Supplies warranty, There is a specific corrosion
tation costs of the supplies to its facility and return
warranty provided by Stewart & Stevenson and
to user,
administered by Stewart & Stevenson through your
local WARCO. (NOTE: To obtain services for this
c. The contractor has the right to inspect any
corrosion warranty, your local WARCO simply con-
defective supplies (concurrently with the Government
tacts Stewart & Stevenson at 1-800-221 -3688, and
representative), wherever located, within thirty (30)
asks for the Warranty Department).
working days of formal notification of warranty claim
for the purpose of evaluating the cause of, or exis-
Warranty Duration - One hundred twenty (120)
tence of the defect(s).
months from initial acceptance (Conditional or Final
Acceptance, whichever occurs first, as identified in
Block 3 of DD Form 250).
5
