TB 10-4610-240-24
10.
Alterations/Modifications. Alterations and modifications shall not be made unless expressly authorized or
directed by: U.S. Army Troop Support Command, 4300 Goodfellow Blvd., St. Louis, MO 63120-1798.
11.
Design Performance Specifications. Equipment performance is as specified in the appropriate technical
manual. The warranty tag for the unit is located on the unit control panel or on the frame.
12.
Nullification.
Actions taken by Government personnel which will void ROWPU end item or component
warranties are:
a.
Failure to operate the ROWPU and/or components in accordance with approved Technical Manuals;
b. Failure to maintain the ROWPU and/or components in accordance with approved Maintenance Allocation
Chart recommendation and Technical Manual procedures;
c. Failure to properly install, connect, position or adjust the end item and/or components as prescribed by the
appropriate Technical Manuals;
d. Failure to adequately preserve a ROWPU unit before placing said unit into storage or failure to adequately
depreserve a ROWPU when said unit is removed from storage;
e. Transportation or storage of a ROWPU unit under conditions determined to be detrimental to the
performance of the unit;
f.
Operation of the end item and/or components outside stated performance parameters;
g.
Operation of the end item and/or components for purposes other than intended (as a water purification
system):
h. Removal of components from one serial-numbered ROWPU for reinstallation on a different serial-numbered
ROWPU (cannibalization). (Installation of components that have been repaired under this warranty program being an
exception):
i.
Modification or retrofit of components or equipment not expressly authorized by EASI;
j.
Failure to maintain appropriate documentation that would resolve, conclusively, any question concerning the
use, maintenance or deployment of the end item resulting in a warranty claim;
k.
Deployment of the end item in a combat zone or exposure of the end item to combat conditions;
l.
This warranty does not apply to damage resulting from latent defects in maintenance philosophy,
Maintenance Allocation Charts, Technical Manuals or literature. This warranty does not apply to equipment damaged as
a result of incorrect Technical Manuals or literature;
m. This warranty does not apply to spare parts or equipment supplied by contractors other than EASI or as
noted otherwise in this bulletin.
Actions required to keep this warranty in effect are:
a. Proper maintenance (both preventive and corrective) of equipment as prescribed by approved Maintenance
Allocation Charts and Technical Publications;
b.
Transportation, preservation, depreservation and storage in accordance with technical documentation;
3